Usage:
Punch and set the grommet onto the PVC ,PP or Paper material.TU-GM01,a new design hand press grommet machine enables the grommet press to pierce and set a grommet in a single action without pre-punching a hole. And the self-piercing die will help you to operate simply and conveniently, just keeping the eyelet attaching the top die and the washer attaching the bottom die.
Packing:
A foam box contains handle, grommet machine body ,self-piercing die, allen key, four sets of screws.
Operaion:
Step 1:Take out the machine body from the package and lay it on
the worktable.
Step 2:Loose the screw of handle by the allen key,and then
assemble the handle to the machinebody and tighten the screw once again.
Step 3:There are two parts of the die,screw the top die into the top
portion of the machine and theother die to the bottom.(Not too
tight.keep the bottom die lying at the proper position.)
Step 4:Try to push down the handle slowly firmly and steadily,punch
the grommet to the practicalmaterial to test..If not good, please
check all above process and adjust,or contact us directly.
Attention:
1.Do not tighten the bottom die too much when you are not working.
2.Keep the grommet machine away from the water or other substances to avoid rusting.
Maintenance:
Clean the grommet machine with a dry cloth or hair drier.
You had better apply anti-rust oil to the screws and hammer if the
machine is not in use for a long period and keep it in the box.
Thank you for choosing our company products
